Shot this today on the GF3 body, I have GF2 and GF3 and I cant tell a difference in the footage from them and seem to work with the same patches the same.

@feha, it was 1080 NTSC, the Youtube video looks crudy next to the original, realize the original footage is over 100mbits/s bitrate, youtube crushes it down to 4.3mbit/s according to every source I can find.

My work flow was rendered at 50mbits/s that file looks far better than the youtube video do to compression used at youtube.. if you can deal with the short clips issues of no spanning, Mysteron puts out some great looking footage.

Great footage, I am a 16mm lover and GF2 sample seems to show the 16mm's softness indeed. I will try to project some footage on the big screen to better examinate the softness. Only one question, however (I won't arouse bitter controversy!) : do you think that GFx quality could is better than canon 550/600d quality?

5 sec.: a dove, which is flying away, filmed using a hacked gf2, eoshd gf2 hbr (?). 1080 footage renderend to a 720 video, digital zoom and slow mo (50%) done in post, 14/2.5, iAuto, flicker red 1/60. now, i changed my settings to flowmotion 1.11.

@Ebacherville I tested a few of driftwood's settings on moving water (river or lake) a while back, and obtained very good results with virtually no pixelation.

I was going to say 'nice panning on those still images' but then I saw movement in them :) sharp

Biggest thing I found with both GH2 and GF line is the faster the lens the better, basically general rule of any cameras.. Also depends on the patch your using , some show grain more others dont.. some people love a grainy film look others don't.. I find the intra based patches to make the 30fps cameras in the GF line look more, fine grained and more "framey" like 24p film.. many of the other that are based on GOP of more than 1 look more video like.. hard to explain till you com pair them Nativity and side by side. It kind of depends on taste and trial and error with patches and what you like. I have not done allot of testing in low low light, if I'm below 400 to get a good composition, it tells me I need more light. The darker you are the more noise / grain you get . I like grain but not in a underexposed sort of way.

Sorry if this has been asked but I did a search and didn't find and low light/ high iso stuff with the gf2, is it better or worse than the gh2 at like 1600 Asa? Since it isn't as many pixels as the gh2 maybe it's better? But less processing might negate that? Just curious for someone that owns both. Thanks!

I set the flicker at 60, I'm NTSC.. 2x sensor read. nothing special , I will tell you it was easier to "gauge the shot" when I shot at -1, -1, 0, 0, I was shooting at -1,-1,-1,-1 and it was so washed out on the LCD and it looked like grey scale.. the litle under adn over meeter didnt represent anything really.. I shoot by what looks best and shooting flat is always giood except whe it to flat .. the end footage was graded, i knocked down the brightness and bumped the contrast a little.. but thats easy grading..

I usually and as in this example go for what I would call "bright film" contrastey, crushed blacks and "bright looking" most clients like it unless they had something else in mind, like a dark look etc. I'm a corporate customer guy, not many corps. like the horror film dark look :-)

But grading could easily sway footage that way. Shoot flatter and you can grade it any way you need to. But know your customer first.. Its easy for me, I'm in-house A/V production, but we just changed out look from "video" to"filmatic" no big deal, just cant do that do film 1/3" sensor cameras.. Hard part is convincing the bean counters that buying larger sensor cameras are the solution. None the less my personal GH2 proved that, and budgets got approved, and were hacking the GH2s at work :-)

The last test was with just aperture using a old Rokkor 50mm 1.4. it was all GF2 footage. Really this camera can make nice footage if you can control your conditions, I was outside at far before sunset, had to stop way down.. no ND filter at the time, but totally doable.. this camera can make really nice footage.. I'm going to test more with Flowmoton the footage its making really is nice for low bitrate stuff .. can't believe it's coming from a $250 body and a 30 year old ebay $50 lens. The unboxing shot is the Pany 14mm 2.5 lens because I needed autofocus. I can't imagine if VK can lock down full auto for these GF cameras..

The slightly softer feel of the 12mp sensor feels good to me.. I tested some of the Intra patches on the GF2 camera and they were very "filmlike" even at 30fps. Slightly grainy etc.. The GH2 blew me away but these GF bodies are really blowing me away for the price/performance factor.. great cams especially if your in controlled conditions and hacked. Really I can't get this good of footage off my Professional grade ENG style Panny cameras at work that cost 3k+ each.., thus why we are now buying GH2's and hacking them at work. Switching our work flow to segregated audio etc..

Glad I work for a company that can think outside the box and innovate a bit.. had to bring in my GH2 and shoot a a entire project on the GH2 to prove it, but jaws literally dropped when I presented the final footage to my supervisors. Now I have a final screening with the VP's in a few weeks. And this is a not a small company.. we are Inc 500 hall of fame company that typically hires large production houses, So I'm pretty excited a GH2 could do that!

VK and the various participants have done some stellar work on these cameras and patches.. Wish I could contribute more than just testing stuff and helping people that need info. Just doing what I can to help others I guess. I guess that's the idea behind communities.. people helping each other in whatever way they can.

Footage from today's Flowmotion v1.11 tests on the GF2. And yes my lens had a hair or dust on it .. didn't check before I shot with it , it was just a trip to the mailbox...

test footage, filmed using a hacked gf2: eoshd gf2 hbr driving around, streets and motorways, day and night

i'm not so sure if the hack worked though, the bitrate of the source videos is around 17 mb/s! firmware update made problems at the beginning, but in the end it was okay. the bitrate of the rendered video is higher - strange. shooting and cutting process were flawless.

iAuto, "out of the box" footage, day footage was done with 14-42/3.5-5.6 standard, night footage was done with 14/2.5.

any recommendations for other settings? pvdog?

@JayB38 Low lighting? I've watched great clipson vimeo (cheapy CFL) and panny 20 mm f 1.7 ;)