Personal View site logo
GF3 Stable Settings topic
  • 147 Replies sorted by
  • EbachervilleEbacherville

    Threw Mysteron on the GF3 body today for its virgin hack.. makes nice video , had one clip of some long needled pine trees limbs blowing in the wind that averaged a bit over 107mbps bit rate. That was with a transcend Class 10 16gb card.. no recording errors.. seems pretty great if you can get by without spanning. Also noticed the all intra stuff renders faster than other GOP settings... Didn't expect that.

  • EbachervilleEbacherville

    Just got my GF3 body in, have not tested anything on it yet, but will soon.. Liking Flowmotion on the GF2 body

  • AndySAndyS

    Thanks. Likely i will find out on this long shoot I am doing. Sounds good.

  • EbachervilleEbacherville

    nicest while keeping a functional camera yes, does have the minor blocking flaw on super tough scenes but minor.. this is on GF2, I see you are on GF3 thread now.. I have not tested on GF3 yet, my body is not here yet.

  • AndySAndyS

    Ebach - of the GF2 patches you have used, do you consider PVDOG to deliver some of the nicest looking video - all things considered?

  • EbachervilleEbacherville

    Yes, he did say that on the release notes GF3 must be the same.

  • stoneystoney

    @rambo

    1080i for high bitrate, 720p for timelapse, MJPEG for ETC? I think VK mentioned that 1080i/720p must have same GOP on GF3.

  • stoneystoney

    @keithlommel of course!!!

  • RamboRambo

    Arhh yes Lee, now that's pointing the way forward for anyone developing patches. I did ask VK about the missing 50/60 > 25/60 patch from the Fast Action 3-frame GOP, but never received and an answer, thus I was happy to sacrifice 720 for time lapse if Duratix's goes that way . But would dump it if we could get 720p25 without the duplicate frames. Time to revisit this I think as Gf/x manual settings appear to be next on VK's agenda. After GX1?

  • TomasoTomaso

    In the video from the birth of Toller puppies I have in the first part up to 2:41 shot with Cace 2.0 GOP3 on GH2. After that it is shot with cbrandin old settings 44/32 and standard GOP. In the interval 2:41 to 2:54 there is a mix of GH2 and GF3 shots both with cbrandin settings. 1=GH2, 2-4=GF3. After that it is GH2 only again.

  • AndySAndyS

    My gut instinct is to go with PVDOG as "most likely" on GF2. If it looks good on a large TV monitor, I will let you guys know. I have to choose one patch real soon and stick with it for months of filming.

  • LPowellLPowell

    I should be receiving a GF3 later this week for my daughter. I'm interested in comparing the GF3's 25p/30p modes to the GH2's HBR and SH modes. Although PTool 3.65d no longer supports the 720p 50/60fps -> 25/30fps patch that I used in the GF1/GH1 Fast Action 3-Frame GOP Patch, it ports all of the latest GH2 patches to the GF3. This makes the hacked GF3's FSH 1080p25/30 mode equivalent to the GH2's HBR 1080p25/30 mode and provides an opportunity to optimize it individually without the entangled complications of the GH2's 1080p24 mode.

  • KeithLommelKeithLommel

    @stonebat : In that case, my request to you is the same as with @AndyS. Share what you've gained with the community. :)

  • stoneystoney

    One day @AndyS will find the holy grail settings, and I will win Mega Millions lottery :)

  • KeithLommelKeithLommel

    @AndyS : stonebat's settings were developed (if I recall correctly) within 24 hours of the release of the new PTools which enabled hacking the GF2, as a sort of starting point for the community to begin refining best settings for this camera. He almost certainly tested a number of variations that day, along the way in coming up with this "stable" setting, but I don't think he ever claimed it to be the definitive "best" GF2 patch -- just a "good enough" starting point. Later on, others discovered that a lot of settings developed for GH2 worked just fine on GF2, which I think reduced the perceived need for people to work on refining GF2 specific settings, so things more or less stagnated. Recently pvdog came along and started working on his own GF2 settings, sharing them with the community. Some people have tried them and like them, others are sticking with their GH2 favorites from driftwood or others. I haven't seen any direct, scientific comparisons between pvdog's settings and other popular settings. If you've got an important project coming up and you absolutely want the best settings, then the most reliable way of ensuring that is to trust your own eyes and do the testing yourself.

    When you do so, please share your findings with the community. I'm sure there are many others who would appreciate the knowledge gained.

  • AndySAndyS

    Oh, come on!! LOL, What kind of answer is that?? I need some help here. Please - just a quick opinion?

  • stoneystoney

    Frankly I have no opinion.

  • AndySAndyS

    STONEBAT - In your opinion, is the PVDOG 1080i patch noticeably better than the "stable" one you were using earlier (32mb) on GF2? What is your overall view of the PVDOG? Does it really produce superior video?

  • stoneystoney

    Prolly that's because I know the least ;)

  • hi1130hi1130

    @stonebat 32Mbps AQ4 is Most Standard Stable Setting!

  • stoneystoney

    I'm back to the 32Mbps AQ4 stock-gop worry-free settings.

  • EbachervilleEbacherville

    @adamquesada just wanted to confirm that Mysteron is working on GF2 also .. I have a GF3 on the way and may put it on that body, as I need my GF2 with spanning working.. on the GF2 Mysteron worked pretty dang good looked good too. Minus no spanning.. But I don't think Mysteron was designed to span. I tried SpanMyB**chUp, but that didn't span either on GF2. May have been my memory card though.. Transcend class 10 16gb..

  • duartixduartix

    @GF2/3 owners!

    Since I don't own any of the GF line cameras, I'm recruiting testers who are interested in help me test 720p Timebuster settings: http://www.personal-view.com/talks/discussion/comment/51292#Comment_51292

    Thanks for your time.

  • APXmusicAPXmusic

    @adamquesada Do you find that lowering the bitrate would be detrimental to the image quality? I tried it at 64mbps and it seemed to look ok. Anything that's at least double the original bitrate and I frames only would be good for me. I am not too worried about maxing out the bitrates.

  • mattherematthere

    APXmusic - The Driftwood CBR (Constant Bit Rate) settings seem to be working well on the GF3 check out the mysteron "settings" at the bottom of post 1 here: http://www.personal-view.com/talks/discussion/2616/driftwood-quantum-x-settings-series-3-vy-canis-majoris-sedna-orion...-can-u-c-thru-the-myst/p1

Add a Comment