@eminogrande OK, I have understood your intention. If I say honestly, I still cannot judge which is a best setting for you. It is because your choice is finally based on YOUR liking. All newest Valkyries, GOLGOP3-13s, and GOP3ZILLA3 are all-round settings. Please choose your favorite setting. They are the same record level in reliability.

As my personal opinion, I choose GOP3ZILLA3 or latest GOLGOP3-13s in your situation. It is because I will feel if the selection holds the best balance FOR ME. :-)

@bkmcwd

I used "bkmcwd GOLGOP3-13-MAX2_BETA2" HBR(30p) mode.

Thanks for amazing quality settings and your hard work!!

*FILM MODE is NOS.(-2,0,+1,-2) and the lens is LUMIX X PZ45-175mm

*SANDISK Extreme Pro SDXC UHS-I (95MB/s) 64GB

@eminogrande Thanks for using my setting! :-)

IMHO, your choice is not wrong. However, I think that it is also worthy of trying Valkyries.
Regarding switching between PAL and NTFS, please refer to here. http://www.personal-view.com/faqs/gh2-hack/gh2-hack-faq

@Monsterbox Only in 24p, Valkyrie uses high-bit rate most. However, in other modes, each setting may be the about the same.

Although I think that GOP3ZILLA3 is the sharpest, GOLGOP3-13-MAX2 may be recommended if a skin tone is also more important.

Since I have not tried the lens which you use, honesty, I am not sure whether it is the best. Please try GOLGOP3-13-MAX2, Valkyrie 444 TYPE-ZERO2 and Valkyrie Cinema Smooth TYPE-ZERO2.

EDIT: With my subjectivity, I think that GOLGOP3-13-MAX2 is suitable.

Thanks for feedbacks from you! :-)

Although I am busy now, I plan to release "Valkyrie 444 TYPE-ZERO2 C1.5e" earliest possible. And the high version of Valkyrie Cinema Smooth TYPE-ZERO2 is also released as soon as possible. :-)

@spreeni Thanks for good questions! :-)

I'm now curious how you assess the quality of the new settings compared to the older ones. Stability should be the same, right?

Regarding the newest BETA2, I consider that image quality has been improved from the previous GOLGOP3-13 settings. Of course, stability has not changed.

However, honestly, the verification in PAL may be insufficient. Although my BETA Test Team has finished the test severe about reliability in NTSC, in PAL, it is verifying by only me. In PAL, there may still be room for an improvement. Therefore, I welcome the feedback in PAL from you.

Is your latest GOP3 optimized Sedna matrix recommended for Panasonic lenses?

Panny lenses are very sharp and also use many resources of a camera as known well. Therefore, a risk of a camera being frozen is high in using hacked GH2. I have designed the settings on the assumption that use with Panny lenses which are the severest conditions.

Supposing you think that GOLGOP3-13s are also too sharp, you use Valkyries. Of course, these are also designed on the assumption that use with Panny lense.

@ GOLGOP3-13 lovers :-)

"GOLGOP3-13-A2_BETA2" and "GOLGOP3-13-MAX2_BETA2"

I release the new "GOLGOP3-13-A2" and "GOLGOP3-13-MAX2" settings.

All of these matrices are the same as V1s. The main changed parts are having realized Freeze-les and high-bitrate in HBR and 720p. Regarding 60p, it returned to 9GOP from 6GOP. It is because 9GOP can realize high image quality by using bigger frame size.

These are most stable until now and are high image quality GOLGOP3-13s, IMHO.

Please try them! And many thanks for your feedbacks!

*If these are also still unstable, I will further adjust.

Special thanks to @har_k, @Mrhechang and @syoushow! :-)

*Of course, already combined with excellent audio tune @thepalalias's "Pasadena_Pulse_Audio_V2_Beta2"

NOTE:

*Although bit rate setups are quite high, the bit rate which actually appears are lower than these. Since the actual bit rate changes by the object to shoot, please confirm by yourself.(Max bitrate : about 110M in 24p, about 75M in HBR.)

*'MAX' versin and 'A' version are completely the same except 24p.

*The original matrix is adopted in the newest GOLGOP3-13s. It is the middle of a Sedna matrix and a stock character. If it says plainly, it will be the Sedna matrix optimized in 3GOP structure.

*24H and 24L are high quality 3GOP setting with mega size I-frames in GOLGOP3-13-A.

*24H and 24L are high quality 3GOP setting with super mega size I-frames in GOLGOP3-13-MAX.

*24p80%(30p) is available in 24H & 24L both.

*60i, 50i, HBR30p and HBR25p are also high quality and stable 3GOP settings.

*720/50p is 6GOP and 720/60p is 9GOP. It has tuned up so that the bit rate at the time of motion may go up rather than the time of statics.

*I especially recommend you use with SanDisk 95MB/s 64GB SDXC card.

*In camera playback is available in all rec mode except 24p in GOLGOP3-13-MAX, at least available after reboot the camera.(Not tested full yet, but probably)

*EX Tele, iA mode work.(Not tested full yet, but probably)

*Spanning in 24H, 24L with SanDisk 95MB/s 64GB SDXC Card. In other rec mode, need test.

*Spanning in other cards needs to be tested.

Sorry!!!

The 1st zip is wrong. Please download 2nd and 3rd!

1st: Wrong zip

2nd: GOLGOP3-13-MAX2_BETA2

3rd: GOLGOP3-13-A2_BETA2_Revised edition

Thank you, i beginner

Link to the original firmware http://panasonic.jp/support/global/cs/dsc/download/fts/dl/gh2.html

@supercharger Thanks for testing my settings! :-)

but I can not find mode HBR30p FSH, SH, HBR I only 25p Please tell me how to set the mode 30p

Excuse me, I do not understand your meaning. Please refer to wiki, if it is an affair of the method of reading an ini file into PTool.

@everest_08 Since it seems that there is no cause in the setting, I have felt relieved. And, many thanks for evaluating Valkyrie. :-)

But not flat enough is there another version after that?

V2 of Valkyrie which adopted Flat4 matrix is the newest. UPDATE(2012/11/03):I have released Valkyrie Flat4 V2 'Apocalypse Now' with Driftwood's Flat 4 Matrix in all modeshttp://personal-view.com/talks/discussion/comment/95494#Comment_95494

Since there is also Valkyrie which adopted "444 matrix" and "Cinema Smooth matrix" as others, please try.

Cool thanks Man!!