Personal View site logo
Make sure to join PV on Telegram or Facebook! Perfect to keep up with community on your smartphone.
Please, support PV!
It allows to keep PV going, with more focus towards AI, but keeping be one of the few truly independent places.
Pilotfly H1 and H2 3 axis handheld gimbals
  • 152 Replies sorted by
  • balazerbalazer

    Thanks for the heads-up, @ntsan. Copter-RC says my H1+ package is on its way.

  • ntsanntsan

    Pilotfly H1+ now with 32bit and dual IMU

  • gkcheunggkcheung

    Mine arrived and I did a quick test run with the kids. I stabilized one long dolly shot but the rest is as it flew.

  • 5mars5mars

    Hello, I've the PilotFly H1, it works great with GH4 + Olympus 12mm f/2. My first test with the 12-35mm wasn't perfect but ok. Motors sometimes began to tremble and the camera tilted on rotation.But It was out of the box, just after 5 minutes of balance (now it's much better).

    It's important to change PIDs and to make the Gyro calibration for better results.

    You can read my little (french) article here : http://www.5mars.com/pilotfly-h1-stabiliser-sur-le-bout-des-doigts/ I will upload soon an other video with the lighter 12mm setup.

  • MikeLinnMikeLinn

  • ntsanntsan

    A7II and 16-35mm OSS F4

    By using qr plate at bottom.. good idea!

  • adamquesadaadamquesada

    Venom 35C 3S 1000mAh 11.1v LiPO http://www.amazon.com/gp/product/B00K3OZ4BS

    We have 2 of these, they give about an extra hour each, but will probably last longer on a lighter setup. We fly a G6 + voigtlander 17.5mm so our setup is a little on the heavy side.

    We also made a very short cable (the one that comes with the H1 is pretty long) and just Velcro this small battery to the handle. Very convenient for when the internal runs out.

  • Manu4VendettaManu4Vendetta

    Another combination with NX1.

    @mprince , Thanks for the info.

  • russbuttrussbutt

  • russbuttrussbutt

    I Frankenstein'd a DC cord so that it can be regulated to 11.1v to power the Pilotfly H1 externally. I plan on using the IndiPRO Tools Power Pod that pushes out 14.4v.

    http://www.bhphotovideo.com/c/product/1109304-REG/indipro_tools_qpodlp14_power_pod_quad_lp_e6.html

    IMG_0863 (1).JPG
    1280 x 960 - 424K
  • mprincemprince

    I think it works well with the NX1. It is my first gimbal and probably not balanced perfectly. On that last shot, the movement you see is actually the fence bouncing, not the camera. Plus my focus is pretty bad!

  • Manu4VendettaManu4Vendetta

    Another footage with the NX1.

  • Manu4VendettaManu4Vendetta

    Some asked if Pilotfly or Nebula could be used the NX1, in Vimeo Michael Prince has uploaded a footage with PF H1 and NX1. Next to the end can see some shake, the question is by weight of the camera or the operator or settings balance.

    PD: Sorry for my bad english.

  • Manu4VendettaManu4Vendetta

    Im thinking seriously buy this gimbal. Possibly the best option for that price.

  • russbuttrussbutt

    So I just got my Pilotfly H1 and balanced it to the best of my ability but it leans a little to the left. How do I fix that? Is that Gyro Calibration or ACC Calibration?

  • Manu4VendettaManu4Vendetta

  • Manu4VendettaManu4Vendetta

    @Jive, thanks for info. I will considers it. ;-)

  • Manu4VendettaManu4Vendetta

    Wow, 'This product is no longer in stock', from the page of the manufacturer.

    PFH1.jpg
    695 x 605 - 217K
  • JiveJive

    @Manu4Vendetta dolly movements are possible with 3-axis gimbals, but they are not easy. Dollies/Sliders are locked down on a linear track which restricts movement on that axis. A gimbal is not locked to any axis, so maintaining a completely linear movement can be difficult.

    However, with practice (and several takes) it is possible to simulate a dolly move. Post-stabilization use warp stabilizer and the like can help to achieve a "locked down" camera movement as well.

  • Manu4VendettaManu4Vendetta

    Every time it seems more tempting.

    What long does the shipping to US?

  • PeterBPeterB

    Just took delivery of my PilotFly H1 and here is my first attempt of using a gimbal, of any type. Whilst there was a fee for freight it was fully insured and signed delivery by Fedex. Delivery only took 5 days to Australia.

    The build quality is really good. Only took 10 minutes to balance my GH4 with the 12-35 lens. I had no problem framing shots as the back screen on the camera was still very easy to see.

    You will see a bit of bounce and probably other problems as well but with these sort of results on a first attempt, straight out of the box, this gimbal is fantastic.

    Happy Shooting

    Peter

  • Manu4VendettaManu4Vendetta

    A lot of bounce, but interseting.

  • russbuttrussbutt

    I'm glad I'm not the only one waiting for theirs to ship.

  • vbwoodvbwood

    Excited, ordered mine late last week and should be close be being sent out now.

    For those that are interested, on their facebook page they have posted photos of their motor winder in action. Apparently they make their own motors for the H1.

    https://www.facebook.com/pilotflytech

    Cheers, Vaughan

  • russbuttrussbutt

    Would anyone know if the Anker 20000 mAh 12v battery work with the Pilotfly H1? Here's a link: http://www.amazon.com/20000mAh-Aluminum-Portable-Multi-Voltage-Technology/dp/B005NGLTZQ

Add a Comment