Personal View site logo
Canon EOS-1D X Mark III Camera topic
  • 65 Replies sorted by
  • On March 25, Canon announced a defect in the digital single-lens reflex camera "EOS-1D X Mark III" (firmware Ver.1.0.0). It will release the firmware in early April.

    The phenomenon that was observed was that, in some cases, the camera did not operate properly even if the AF-ON button or shutter button was operated when the electronic level in the viewfinder was set to “Display”. There is. "

  • Rolling shutter

  • New firmware - version 1.2.0 :

    • Enhancements when using Browser Remote:
      • The image list displayed will be refreshed automatically on the browser.
      • On the shooting screen of the browser, you can set the movie resolution and a high frame rate.
      • On the shooting screen of the browser, you can change the movie shooting mode.
      • On the shooting screen of the browser, Live View will be displayed as soon as you select the movie shooting button.
    • Enhances Auto Focus (AF) for improved face and eye recognition at greater distances.
    • Fixes a phenomenon that may occur during viewfinder shooting, in which the shutter may not be released or the camera may not operate in the following settings:
      • In One-Shot AF mode, when the AF Area Selection Mode is set as Zone AF, Large Zone AF or Automatic Selection AF.
      • In AI Servo AF, when direct AF point selection is made using the smart controller.
      • When the Register/Recall Shooting Function is assigned to the AE Lock button, in the Custom Controls.
    • Connectivity during FTP transmission has been improved.
    • Improves Wi-Fi connectivity when using the Wireless File Transmitter WFT-E9.
    • Fixes a phenomenon, in which the card access time may take longer when using certain CFexpress cards.

    https://www.usa.canon.com/internet/portal/us/home/support/details/cameras/eos-dslr-and-mirrorless-cameras/dslr/eos-1d-x-mark-iii/?subtab=downloads-firmware

  • EOS-1D X Mark III -- Firmware Version 1.4.0

    1. Added low bitrate recording option
    2. FTP Transfer Status Display
    3. Improves connection reliability when using FTP and USB simultaneously

    https://asia.canon/en/support/EOS-1D%20X%20Mark%20III/model

  • Canon has released firmware v1.5.0

    Firmware Version 1.5.0 incorporates the following enhancements and fix:

    • Adds [Canon Log 3] to [Canon Log settings].
      • Support for RAW movies shot with Canon Log 3 and RAW (Light) will be available in a future version of Cinema RAW Development and in Digital Photo Professional software.
      • Support for the processing of RAW movies shot with Canon Log 3 and the application of Viewing LUT will be available in a future version of Digital Photo Professional software.
    • Simultaneous movie recording on card 1 and card 2 has been added, however RAW movies and RAW(Light) movies cannot be recorded simultaneously on card 1 and card 2.
    • Support for the VPG 400(Video Performance Guarantee Profile), a standard based on the CFexpress 2.0 specification, has been added.
    • Fixes an issue in which there are rare instances where the shooting settings for Still Photo mode are retained when a user switches to Movie mode.

    Download firmware v1.5.0 for the Canon EOS-1D X Mark III

  • Firmware Version 1.6.0 incorporates the following fixes and enhancements:

    • Improves head detection performance to support helmets or goggles in winter sports.
    • Eliminates the center press operation of the multi-controller to prevent accidentally transferring images during FTP transfer.
    • Adds the ability, when the Rating function is assigned to the Protect/Voice memo button, for voice memos to now be recorded by pressing and holding the button.
    • Adds the ability, when using EOS Utility or Browser Remote for remote shooting with two cards inserted, to set the recording method and to select which card to be recorded to.
    • Changes the default value of [Connection option settings], [FTP transfer settings], and [Power saving] to [Disable].
    • Changes the default value of [FTP server] → [Passive mode] to [Enable].
    • Improves operation stability during FTP transfer.
    • Fixes an issue, in which noise occurs along the edges of bright subjects when using Canon Log for movie recording.

    Download Firmware v1.6.0