Personal View site logo
Make sure to join PV on Telegram or Facebook! Perfect to keep up with community on your smartphone.
Please, support PV!
It allows to keep PV going, with more focus towards AI, but keeping be one of the few truly independent places.
Lilliput A7S FullHD IPS On-Camera monitor
  • Vitaliy_KiselevVitaliy_Kiselev

  • 14 Replies sorted by
  • Glenn7Glenn7

    Really affordable. But why they made bumper in such colors?

  • Vitaliy_KiselevVitaliy_Kiselev

    Our overview

  • Vitaliy_KiselevVitaliy_Kiselev

    PV Lab Report: DC Consumption Test at typical easy mode - FHD 30fps, Peaking

    Cutoff voltage - around 4.60v (as voltage drop below this value monitor will turn off or blink or such).

    Standby consumption - around 2,1 watts, very high! Make sure to remove battery!

    image

    sa982.jpg
    800 x 481 - 67K
  • Vitaliy_KiselevVitaliy_Kiselev

    PV Lab Report: sRGB/Rec 709 mode color gamut

    image

    sa1086.jpg
    800 x 697 - 82K
  • Vitaliy_KiselevVitaliy_Kiselev

    PV Lab Report: White Color Spectrum, sRGB Mode

    image

    PV Lab Report: Blue Prime Color Spectrum, sRGB Mode

    image

    PV Lab Report: Green Prime Color Spectrum, sRGB Mode

    image

    PV Lab Report: Red Prime Color Spectrum, sRGB Mode

    image

    sa1087.jpg
    800 x 287 - 61K
    sa1088.jpg
    800 x 287 - 54K
    sa1089.jpg
    800 x 286 - 56K
    sa1090.jpg
    800 x 286 - 47K
  • GrimorGrimor

    What does the lower red wave at white colour spectrum mean? Is this monitor color accurate?

  • Vitaliy_KiselevVitaliy_Kiselev

    @Grimor

    Default white setting is not ideal, need to adjust B channel. If you look at Gamut CIE Chart you will see that adding slight amount of Blue prime to other channels is also good.

    Gamma curves

    image

    RGB levels

    image

    sa1099.jpg
    800 x 359 - 43K
    sa1100.jpg
    800 x 358 - 37K
  • GrimorGrimor

    Under "Custom Temperature" i can set Offset & Gain of each RGB channel. What will be a more accurate custom setting?

  • Vitaliy_KiselevVitaliy_Kiselev

    Under "Custom Temperature" i can set Offset & Gain of each RGB channel. What will be a more accurate custom setting?

    It depends on specific monitor. You can just connect to computer, find any place with grayscale generator and adjust by eye.

  • MirrorManMirrorMan

    I just got an A7s, my first field monitor, but I like it so far. It feels well made and is easy to set up. Took some time to adjust the color settings. Vitaliy is right about the blue channel. Here is what I ended up with adjusting the 'user temperature' by eye (attached to a macbook using 'HD 709-A' color for both monitors): Red Gain +122 Green Gain +126 Blue Gain +138

  • GrimorGrimor

    I found a bug trying to de-squeeze anamorphic 4:3 footage from Gh5 with A7s. When i set the aspect ratio to 2.35:1 on the monitor image became glitch like, with weird lines across the frame. If original signal is 16:9 then the 2.35:1 aspect squeeze without issues. Any tips or workarounds?

  • Vitaliy_KiselevVitaliy_Kiselev

    @Grimor

    Can make short demo, explain how to reproduce and send them email.

  • Vitaliy_KiselevVitaliy_Kiselev

    Internals (5:50 start)

  • Vitaliy_KiselevVitaliy_Kiselev

    Lilliput A7S deal for $105

    https://www.adorama.com/g/deals

Add a Comment