jo447

Canon 5D Mark III topic
one other thing. The original battery grip can use 6 AA battery so it should output 1.5v x6 = 9v so my guess is that it should work... but it's just a guess, and if i'm wrong it's an expensive ''guess''

Comment by jo447 April 2013 permalink
maximum voltage 5dmark3
done thx

Comment by jo447 April 2013 permalink
Canon 5D Mark III topic
Hi i have vmount battery that powered my gh2 and works quite well. the output is 9.2v I bought a 5dmark3 and would like to use this vmount on it. Is 9.2v too high for the 5d? a fully charged canon battery is around 8.4v, would it damage the camera i…

Comment by jo447 April 2013 permalink
12mm f/1.6 Noktor
Hi HillTop1, that's good news, I might get a free lens if everybody say that!!! :D I don't know if they are still in back orders. But I would say it takes around 1 month to get the lens after you order it directly from the manufacturer.

Comment by jo447 May 2012 permalink
12mm f/1.6 Noktor
@stonebat: Thanks, there was no color correction applied in post. Only a denoiser filter (starting at the starbucks section) @Crazypete: Thanks, the fireworks looks really good with this lens (it actually looks pretty good without camera as well). …

Comment by jo447 May 2012 permalink
12mm f/1.6 Noktor
Hey, I made a small video with this lens. You can see here : https://vimeo.com/41349380 I used a hacked GH2, no filters, I applied a noise reduction filter in post for the second half of the video

Comment by jo447 May 2012 permalink
Manfrotto 561BHDV-1 Fluid Video Monopod with Head. Any good?
I didn't like the head, so I bought the manfrotto 562. I took off the manfrotto plate and put a wf717 instead and add the manfrotto plate on the top of my head so I can still move my gh2 quickly from my rig to my monopod. you can see a video he…

Comment by jo447 July 2011 permalink
Interesting stuff: Weifeng DSLR rig parts
@ Vitaliy Sorry, i just realized I meant '' follow focus ring'' not ''rig'' So yeah I was talking about the adjustable follow focus ring that you adapt on the lens made of bad quality rubber

Comment by jo447 July 2011 permalink
Interesting stuff: Weifeng DSLR rig parts
>Please PM stefanos. This topic is not about this. Or make separate topic, ok? sure, sorry it was off topic. I just want to inform you that as far as I know both E-Image and Tilta do not produce battery based solutions, they buy them from other…

Comment by jo447 July 2011 permalink
Interesting stuff: Weifeng DSLR rig parts
Sure, you can check on the smpte website and you will see that E-image is one of the exhibitor, so I don't lie when I say I saw them. They had 3 follow focus rig made of rubber (for around 25$), 1 was broken (the connection), the other two show…

Comment by jo447 July 2011 permalink
Interesting stuff: Weifeng DSLR rig parts
I saw the product at the SMPTE in SYDNEY today and I can tell the build quality is really low. Many item on demonstration were already broken after 2 days of use. The rigs look cheap (but are cheap as well). Far from Redrock. The knobs are better th…

Comment by jo447 July 2011 permalink
GH2 Possible Improvements
well... you can do 1/24s.... not sure that would be very useful though.... ;-)

Comment by jo447 June 2011 permalink
Ipad teleprompter
(my little 2 cts : I'm just a little tired to see "HD" every where.... Does it mean that your Beamsplitter has a 1920x1080 resolution ? So can it work with a 4k red camera ? and what about the 501HD from manfrotto? what the point to h…

Comment by jo447 June 2011 permalink

Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

About

Username: jo447
Joined: April 2011
Visits: 249
Last Active: April 2013
Roles: Member

jo447

Howdy, Stranger!

About

Top Posters