There aren't many review (or any really) for the all steady but from what I can tell it seems pretty limited in terms of having access to different modes. There are 5 modes which are pre-programmed to:

User Setting 1: Lighter configurations with full follow. (e.g. Panasonic GH4 and the Sony A7S/A6000) User Setting 2: Medium configurations with full follow. (e.g. Canon 5D Mark ii/iii camera with up to 24-70mm & 24-105mm lenses) User Setting 3: Heavier configurations with full follow. (e.g. Canon 5D Mark ii/iii camera with up to 70-200mm & Red Scarlet/Epic/Dragon which requires optional extension brackets or cage upgrades.) User Setting 4: Lighter configurations with disabled joystick under multirotor or with optional wireless joystick to work on top of tripods or under crane. User Setting 5: Medium configurations with disabled joystick under multirotor or with optional wireless joystick to work on top of tripods or under crane.

Their idea being that once you receive the gimbal you'll never have to adjust any PID settings since they have presets that should have you covered. However what this means in reality is that you only really have 2 modes to use - "full follow" and "Wireless joystick". Your other 3 modes are taken up with presets for cameras you may or may not use. And if you're operating a heavier camera then its just one mode!

I called Turbo Ace about this and they said they would pre-program any mode(s) you needed for your order, but that would take up one of the 5 slots. That would be fine if you knew what camera you'd be flying for your duration of your ownership of the gimbal but if, say 6 months down the line, you change cameras and you go up or down a weight bracket you'd have to send the gimbal back to Turbo Ace for them to re-program the gimbal. They'd charge for this a rate of something like $150 per hour.

Now I've never owned or operated a gimbal before but it seems a bit strange to me to be kinda locked in to what ever you have when you order the gimbal, unless you're willing to pay up. It would be great to know from other Gimbal owners if the "full follow" mode is enough. The gimbal comes with a thumb joystick btw.

Are any AllSteady 6 owners who can give some feedback on their experience so far?

Thanks

Whats it all about? Achieving the best looking overall pictures around - throughtout the popular GOPs. The great thing about Cluster X developments is you can mix and match some of the settings to combine into your favourite setting (e.g. GOP1 for 24p and 25p/FSH, GOP 6 For 1080i60/30p and 12/15 for 720p etc...). Slipstream settings do this for you (mixed and matched and with spanning capabilities where we can plus 80% modes on H & iA mode support).

This has been a tough (and still ongoing) challenge, each setting (and ptools patch change) takes an age to check & measure. Its exhausting work - even with 4 cameras on the go. The measuring to check Quantisation, frame sizes and stability adapting one change at a time is pretty debilitating on mental energy. I hope people appreciate waiting for each setting to appear.

All the new Cluster X series settings for each GOP attached below have been tested on the notorious 14-140 Pany sharp lens. Give me feedback.

Its as simple as A, B, C, D, E, F ! Each .ini setting in ptools for Cluster X Series will equate to setA ('DREWnet' 12/15 GOP), setB ('Nebula' 6 GOP), setC ('Spizz' 3 GOP), setD ('Moon' 1 GOP/3 GOP), setE (Slipstream 1) & setF (Slipstream 2). Any updates will stay on these sets.

"Bitrate is King. Who needs hi powered scaling matrices when enough Bitrate (if you have it) can drive the quantisation..." Quote from my conversation with Dark Shikari - X264 dev 2012

If you enjoy these settings please don't forget to donate to personal-view by clicking on the link above. Gratitude and thanks to Vitaliy Kiselev.

.

Cluster X 'Slipstream'

A series of GOP combination settings drawn from the Cluster X series but set at nominal bitrate settings (40 to 72Mbps) to achieve a better spanning percentage for longer recordings plus the ability to be used on slower sd cards. Slipstream attempts to correlate the actual clip duration to the TS (transport stream) duration whilst providing error free population of the cpb buffers. And it seems to work very well at these settings. :-)

Slipstream #1 (Rev B): Release Date: 10/03/2013

A mix of Nebula and DREWnet settings all tightly packed into 72Mbps max 24p and around 40-52Mbps for everything else which in my PAL tests SPAN! You also get 80% mode at 24H and iA modes working. NTSC 720p60 and FSH/HBR30p should now span.

1080p24/1080i50/HBR25p/720p50 at GOP 6 1080i60/HBR30p & 720p60 at 12 GOP

Slipstream #2: Release Date: 10/03/2013

Including;-

1080p24H 88Mbps GOP3

FSH1080i50/HBR25p 60Mbps GOP3

720p50 62Mbps GOP6

FSH1080i60/HBR30p 44Mbps GOP12

720p60 52Mbps GOP12

Slipstream #3: Release Date: 15/03/2013

Including THE GH3 MATRIX ON ALL REC MODES;-

1080p24H 150Mbps GOP1 (moon style)

FSH1080i50/HBR25p 70Mbps GOP1

720p50 62Mbps GOP6

FSH1080i60/HBR30p 64Mbps GOP3

720p60 52Mbps GOP12

NB: Ive had one occasion where the camera just freezes with no apparent error. If this happens simply leave the camera alone for a minute or two until it fully writes out to sdcard (emptying all buffers) THEN turn off/battery pull. Hopefully you will notice that all your spanned files are there on next powerup.

I've been following along the hacking progress for well over a year now but have still yet to make the switch and try a hack out.

I'm going to go to Paris next week for a holiday and am taking my GH2. I was planning to go stock, but i figure it'd be nice to get some more quality, and some higher ISO access.

My question is which setting is the best for me to try first. I'll be shooting with a mix of transcend cards, class 6 and class 10. I guess i'll have to go for class 6 safe settings then. I want maximum stability, and dont want the filesize to balloon up too much as i'll have limited cards with me.

I'll go ahead and scour the forum some, but i've been a bit out of it lately so would appreciate some recommendations of super stable first attempt hacks for this sort of situation.

Cheers