• Bird feeder (£3) - to make the frame. Length 33cm. Diameter 6cm (the cage is metal, but not too robust. I might replace it with a much tougher mesh from one of those metal mesh bins http://www.ebay.com/itm/190683027361)
• 2 round tea strainers (£3) for the FRONT and BACK end caps
• 2 plastic jars with diameter 6cm (£2) - I will cut off the caps so as to make both end caps of the blimp to easily screw onto the frame
• 300mmX200mm of Ultra fine mesh (£4) http://www.ebay.co.uk/itm/Fine-Stainless-Steel-wire-mesh-Insect-Reptile-Vent-Vivarium-/110876648077?_trksid=p3984.m185&_trkparms=algo%3DRIC.CFNPRP%26its%3DI%26itu%3DUA%26otn%3D5%26pmod%3D110876648077%26ps%3D63#ht_500wt_1077 This will be used predominantly at the front of the construction. Fine mesh will go inside the frame. It will be last layer that the wind will travel through, and hopefully by then it will be completely broken. I'M NOT ENTIRELY SURE IF THIS FINE MESH WILL AFFECT THE SOUND TRANSPARENCY. I really need your advice here. PLEASE HELP!
• Micro fiber cloth OR nylon stockings (£1) - this will go inside the birdfeeder, after the fine mesh
• 6 Rubber bands (£0) - to hold the mic inside the bird feeder in X pattern
• 2 fluffy faux-fur lady's ankle warmers (£5) http://www.ebay.co.uk/itm/300698800758 hopefully these are good, thick and tight enough fake fur to block most of the wind. I will just saw the ends of these fluffies together, to make them into "bags". They are 40cm long, so should hold the entire blip pretty nicely. If you can find any better material on eBay please post a link.

So what do you think? Will it work?

I'm especially concerned with a small (6cm) diameter of the birdfeeder, but I hope that adding the fine mesh should supplement that like in this video

Or am I wrong?

I didn't have much time to check out the gh4 so far, a lot of work hinders me, going too far into research for each little thing myself, that's why I hoped I could get a little support from you hear. Mostly I'll record video and sound on myself at the same time, not sure if I'll have an assistant from time to time. My idea until now is to record in 4k, maybe in 24fps should be alright I guess. The shooting will be for a 5 video monitor/large flat screen panels installation.

My equipment so far: GH4 with kit lens 12-35mm

• Voigtlander Nocton 17.5mm 0.95f with UV and ND filters
• Voigtlander Nocton 42.5mm 0.95f with UV and ND filters
• One SD card SanDisk Extreme Pro 32GB 280 MB/s (I'll have another one like that)
• only one battery so far
• trolley case

I'll definitely need a second battery or the battery grip, is it a good thing to have?

• Sound Recording device
• Microphone (one or two? maybe too much to handle!)

• Wind jammer (boom?)

• Any experiences with 'Rycote Zoom H5 Audio Kit' or 'Tascam DR-60DmkII 4-Channel Portable Recorder with Rode NTG2 Condenser Shotgun Mic Kit'?

• Tripod mainly to use as proper stand in any condition, not sure if I'll need a very heavy one for doing pans?

• Rig / steady cam? I actually would prefer shooting with a rig/steady cam to make pans with a heavy tripod. Follow focus! Which one?

• A super-portable extra light like dedo light!

• SSD discs for backups?

• A Mattebox?

And everything should be of proper quality, lightweight one-person-solutions, possible to get through the airports O.K..

Thanks, I appreciate your hints, ideas, experiences and comments ! kolinko