@rajamalik @thepalalias @Benibube thank you for the comments guys. @cjdincer

rajamalik, @coors thanks for testing the setting(s) guys; rajamalik Congratulations for your little b...

Releasing the setting, after very long time working on it, the name and some info see 1st alinea:

I know it was/is a challenge (AQ4 and Q8 in the same setting) for most detailed and lower compression setting and want everything constant bitrate-style and rajamalik asking for the most detailed one every time but here is the release of the "OBS AQ4-Q8 161M-setting exTReme-KAYSERI A-GraDetail" setting, the setting shows (due to using lower compression in the setting, but I believe so you see more), maybe say high ISO, a little bit more noise/maybe artifacts, I did not used 3rd party matrix, but the goal is to get every bit (in this situation pixel) what GH2 is seeing/recording, out of it and see everything yourself when playing back and in post too, and cbr-style bitrates too; (do the rest/editing in post).

Okay it's logical to say when you have an very detailed and low compression setting, on high ISO you see some more noise/artifact etc. but you get everyhing out of the gh2 I believe. But I believe, if an "matrix master" can make a matrix especially for this or similar setting then we get an setting with some reduced noise/artifacts directly on the sd-card itself. But matrix by the way is a subjective matter therefor it is up to you to judge or not judge things by matrix way but settings way. And I did not used third party matrix for the setting.

But, on the other hand: maybe there will be enthousiat users to get/shot/capture, you name it, this way and do rest in post, I think and believe it is maybe some personal taste and this setting is on paper very good for low detailed scenes or for someone always looking for it or exactly want details and seeing that little bit more.

The setting gives you constant bitrate-style bitrates and for example 720p50 give you around 100Mbit-range bitrates, this is high in comparison with some other gop-1 720p50 settings/ and some of the other gop-1 720p setting are not working reported earlier by others I though. Don't forget 1080iFSH(50) is available too and also to try for slow motion with deinterlacing in post for 1080p50, maybe this setting is better then other 1080i also, who knows. (This is for some of you as a fan of deinterlacing 1080i to 1080p50 in post, instead of 720p50 give a try too.)

Suggestion: Maybe, from scratch, a matrix master or a matrix maker can make a matrix to also temper some noise/artifacts, high ISO etc. especially for this setting, but also this setting is for people who get the most details out of gh2 and loves to do things in post...

Setting itself, "OBS AQ4-Q8 161M-setting exTReme-KAYSERI A-GraDetail":

(for me unbelievable to let the setting work with AQ4 and Q8 in the same setting at the same time, "All to detail and low compression" at a such high setting, especially when you know that settings for some mode influences the other mode, but I've got them work together for:)

• working (/or say, I tested) for the modes => 1080p24H, 720p50SH, HBR, 1080iFSH(50), 80%24L but, with such high bitrate setting it was not easy to get, all the modes above, working
• for all the modes I've written above, constant i-frames-style (+ b-frames for 720p50), cibf-style, except for 80%24L though it has high i-frames between around 360KB to max around 780KB, average around 600KB, and constant bitrate-style, cbr-style, for all the modes I've written above too, (including for 80%24L mode)
• tested with manual lens, (auto-lens check for yourself)
• there is a time-limit 3:45min but every mode is working for me with my setup (sd card and manual lens), so recording and also in cam playback available for, maybe including but not limited to (does mean other modes such as 720p60 needs testing, test for your country, I tested the PAL), the modes from above
• sandisk 8GB SDHC 95Mbits/s card

some bitrates I've got during testing, setting for 1080p24 is high to the 150M range, but see others very good ones: - 720p50 100M (for slo-mo see 1080i fsh(50) mode too, for using deinterlacing in post) - 1080i FSH (50i) 100M (especially for people who want 1080p slow motion with deinterlacing) - HBR 100M (I think very good one for hbr) - 80% 24L 100M

here is the setting as .zip file attached