However, when I got it back after repair (in 2014?) the LCD did not turn on when it was extended away from the camera body. I shipped it in for repair again and as far as I recall the complete hinge assembly with cable was replaced. Now the LCD worked correctly again.

Summer of 2016 the LCD went dead again. However some light tapping/knock shock to the side of the body/hinge makes the LCD turn on again in some positions, but the colors are sometimes posterized or the image is darker than normal. There is no wobbly hinge, but it seems that the flex cable in the hinge has issues yet again.

Looking for parts on ebay I find both the flex cabel as a separate part and the flex cable allready attached to the hinge assembly.

Do anyone have experience replacing the complete hinge with flex cable?

Also, I'm kind of disappointed about the flex cable malfunctions. Is this a typical problem of cameras with rotating LCDs? Looking at the GH3 flex cable parts on ebay they seem to sell a lot...

"People mistakenly call it a color space," Griffis said. "It's actually a two-dimensional plane and what you really need to know if you're a creative is this is your palette of colors but what the horseshoe chart doesn't tell you is how bright each color can get. White will always be the brightest because it's the sum of all three primary colors."

"So we've got this interesting problem that we've lived with for the better part of 60 years where the colors in film go out farther but you can't get as bright and in television there are less colors but you can get brighter," Griffis told Gizmodo. "And the practical consequence of that for the content creator is that the Red Bus of London that looked so great in the movie looks like Campbell's Tomato Soup on the Blu-ray unless someone does something."

http://gizmodo.com/how-dolby-vision-works-and-how-it-could-revolutionize-1594894563

So Dolby (who makes the most amazing video monitors) finally did something. And When it hits TVs and Computer monitors... all this REC 709 bullshit can finally fuck off.

I am so damn happy... you don't even know.

Selling a monitor in great condition. Used it exclusively with my Blackmagic Pocket. Works fine. Reason for selling is I'm not shooting enough these days and don't see the point of it lying around. Great monitor on a budget. Comes with original box and cables. Accepts LP-e6 battery. Features Histogram, False Color, Focus peaking, Frame Guides and audio meters. Asking $85 shipped in the US. Paypal preferred to confirmed address.

Here are some pics: Album [url]http://imgur.com/a/J0gWt[/url]

[img]http://i.imgur.com/wlLvLZ0.jpg[/img]

[img]http://i.imgur.com/WczaLml.jpg[/img]

[img]http://i.imgur.com/vyLYoKQ.jpg[/img]

Anyone replaced a GH3 screen before? I see em on eBay for $50. Or any recommendation of good cheap service in USA?

Thanks in advance!

I'll Include pictures of each item.

1. There is some sort of square in the middle of the screen. I believe it has to do with the focus assisting. Is there a way to get rid of this square? I understand it's purpose, but I think it gets in my way, especially with the touch screen becuse it can move.

2. The AF box in the lower right hand corner. Again, I understand why it's there and what it does. But I don't always want that option available. It's just taking up real estate on my display.

3. My guides and info dissapear from the display after 1 minute of sitting. Is there any way to keep them displayed?

4. (no picutre included) This is one I've kind of grown to enjoy, but is there any way to remove the side quick menu from the display?

I'd appreciate any help! Thanks!

Shipping Worldwide via Australia Registered Post or Pack and Track International.

Description Doing a clear-out of my rarely use m43 gears, so unless stated otherwise, these items have only been used once or at most, twice and that's it, stayed in my cupboard since, and without scratches or blemishes or dents or signs of use whatsoever.

1. Panasonic Lumix GX1(silver, original packaging & accessories, shutter count no more than 10, only took videos twice for extremely short period) w/14-42mm kit lens, electronic viewfinder LVF2(never used, brand new), genuine Panasonic batteries x 2 - $399
2. LCDVF - $75
3. Panasonic D Vario-Elmarit 14-50mm f/2.8-3.5 Aspherical Mega O.I.S Lens - $525
4. Panasonic Lumix G Vario 14-45mm f/3.5-5.6 ASPH/MEGA O.I.S. Micro Four Thirds Lens - $200 (This is brand new, never used other than testing once)
5. Zacuto 3x Z-finder - $200
6. Zacuto iPhone 4 & 4s bracket - $35

more gears and photos to follow.

The cost is £60!

I'm living in London, pick up is preferred, but I can also send the camera, within European borders.

http://www.gumtree.com/p/for-sale/8-lcd-monitor-for-canon-cameras-5d-7d/1058609008 I FORGOT TO PUT IN THE PICTURES THE REMOTE CONTROL, It will come with the screen..

What you going to get: -8" LCD Monitor -Canon LP-E6 Charger -Power cable -Sun Shade -Accessory Shoe Mounting Adapter -Remote Control -360 degree swivel mount

Features • Ultra Bright 450cd/㎡ High-Definition Display • Supports Composite Video RCA Input • Display Resolution up to 800*480 Pixels • 16:9 or 4:3 Adjustable Display Ratio • Designed for FPV Application • Application to FPV or Wireless Composite Video Camera in making Movies.

Specifications Panel Size: 8" widescreen Brightness: 450 cd/㎡ LCD Type: TFT LCD Resolution: 800 x 480 Aspect Ratio: 16:9 & 4:3 Contrast Ratio: 500:1 Light Source: LED Backlight Surface Treatment: Anti-Glare Viewing Angle: 70°/70°,50°/70° (L/R,U/D) Inputs: Compostie 1 Video RCA Input, 1 Audio RCA Input Input Voltage: DC 6-12V Input Current: DC 0.5A-1.5A Power Consumption: ≤8W Watts Speaker: Built in, 1 Watt Mount: "1/4"-20 Thread and VESA mounting socket(75mm) Storage Temperature: -20°C to 70°C Operating Temperature: -10°C to 60°C Size: 208 (L) × 146(W) × 32(H) mm Weight: 515g

LCD display of my 2 year old GH2 is now dead. LVF works fine.

Camera works otherwise perfectly and even touch-function on LCD works!, but no image on LCD screen.

Does any know about what might be causing this problem?

Nothing obvious has happened to the camera. Last time used it 2 weeks ago in a wedding.

I didn't find any similar situations on the internet yet.

Located in Sweden

MY QUESTIONS FOR YOU ALL:

1. Can this be fixed? How? Where to get the necessary parts/materials? Can anyone do it for me at a reasonable price?

2. If it's a lost cause. Where can I find a replacement LCD? I've scoured the web and thus far come up completely empty. Even if I get a new LCD, I'd need the plastic housing too.

Any and all help is greatly appreciated. For now I'm just using the EVF and an ext. monitor, but I miss the functionality of that LCD big time.

Thank you.

Before I press record the lcd shows different colors in comparison to the video I can watch after recording (after recording it looks a bit more green). I have tried nearly everything but without any good result.

Is the reason that the DSP of the cam doesnt compute every pic manipulation effect to save energy and to protect the cam from overheating in non recording mode?

any ideas to fix that? Or are patches for the hack available that will fix it?

Thx in advance