I was surprised cause that it produced noise in both circumstances, we had illuminated using two points of light and to try although I did not use other profiles, I changed momentarily only for to see the scene behavior of the noise and in the other modes there was noise. I get a lot of attention because this camera handles sensitivity well and I made a short time inside a bus with very low light, in fact we only used a light that came from the roof of the same bus and a small LED that I used for filling using more quirky ISO's around 4,000 and the noise was minimal.

Is there any reason for it? I let a clip of the short with a gradding.

Thanks in advance.

I've been having these glitches(see pictures below). They started a few months ago, (I checked my older footage). But it's not just mine, three rental models had the exact same issue! Is this a known issue with this model? It ruined a quite some of my shoots.

Also, I send for repair and they put in a new 'mainboard'. But that hasn't solved the problem. I returned it again but I don't have a good feeling about it.

Any suggestions?

last month I noticed strange marks on my footage. I don't remember to see them before. I am quite sure that is not a camera problem, because I tried to record with two different Panasonic GH 2 cameras, one GH 1 camera and smal HD Panasonic camera. I also tried to change a graphic card and my SD cards, but didn't help. The marks are most visible on white walls in strong sun and on the blue sky. (You can see the marks on the video attached. This two video clips are exported from editing software. On clips I added brightness, contrast and sharpness so you can see better the marks. But the marks are visible also on raw footage)

I checked different topics on Personal view, but the only similar topic I found was Panasonic GH4 glitches/issue from Tjibbe. My problem is similar but it is not really the same.

Any suggestions?

Link to video clips (On the first clip look the marks on the white wall of the house. On the second clip look to the blue sky):

Recently I uploaded one more poppoza to vimeo and audio was seriously compromised.
In both x264 or x265 copy versions the audio track (48 KHz AAC 320 Kb/s) has loose a bit of "organicness" and gain more noise but vimeo compression just made it much worse, almost painful.

 
So I'd like to understand 2 things:

A - Did I push the audio too much in post? Please see, well listen to small wav sample extracted from master video file.

B - How could I improve audio compression for web upload maintaining image quality? Regarding the visual aspect, I'm Ok with how vimeo chews my x264/5 uploads, after all for non PLUS users it's always a matter of balance (500Mb 1 HD upload per week).

All constructivist feedback is most welcome =)
As a "token" of my appreciation here's a LUT I made using DRL (zip file)

gashô

According to USPS they delivered the package on May 5 , this is the date I have dont received the lens, as my freight forwarding company they have not been notified or received the package by USPS , the package seems if the zip code, but not delivered, in UPSPS site dont appear who signed the package delivery, I have written them for send me a scanned image or photo of the invoice and they dont have answered.

I reported to Amazon but as the package appears as delivered they are not responsible, equally USPS, equally my courier, the seller equally but I pay U$455 for an article I dont have.

I'm just shortening for give you an idea of the problem . This includes almost U$50 in international calls I made ​​to USPS without success.

I have thought about the possibility in demand to USPS and freight forwarding company in Miami, but I dont know if this is legally possible

I bought by amazon many times and never had this problem.

Bought the GH2 last week and after an weekend filming and shooting photos, i noticed today strange Banding on the LCD and on the viewfinder. Most visible with very fast shutterspeed.

Is this a damaged LCD or damaged sensor? Anyone with the same problem?

Problem is visible with stock 1.1 firmware and also when i hack.

Thanks in advance.

I have tried a blower to remove the dust and also swabbed the sensor with a cleaning kit which removed all the dust etc. but this mark remains!!!

So what does it look like to you and has anyone encountered something similar?

Thanks in advance all!

Namely, when encoding the original footage by using UT codec the colours appear like normal (in Media Player Classic or in VirtualDub). When editing such a footage with Vegas, the colours are preserved, so everything is OK.

However, if the original footage is converted into GoPro Cineform codec, a red shirt appears slightly toward orange in VirtualDub (it is almost OK), but in Media Player Classic the shirt becomes almost orange. When editing in Vegas and exporting the clip (I've tried several settings), the shirt becomes even more orange in VirtualDub and completely orange in MPC.

Does anybody know which settings should I use when recoding into Cineform codec and which settings should I use in Sony Vegas (tips for Movie Studio are also welcome) to retain more or less the "original colours" and, if possible, the original contrast?

I just recently bought a 64GB Sandisk Extreme Pro Card (With 95mb/s) and I applied the Flow Motion v2 hack and tried the Driftwood Apocalypse hack and 720p at 60fps doesn't work. It cancels the recording and says the write speed of my card isn't fast enough. I don't understand why it won't work. The card is the top SD card for the GH2.

I got a slight flickering oscillation when filming still shooting on tripod ! ( as you can see in the video below) the flickering is not constant , sometimes slower sometimes faster

I did a video in ETC mode , to make more evident the bug , which is also present in normal mode , it shooted on a strong tripod , no wind (or earthquake LOL)

this happens to me only with pana zoom lenses I own ( 14-45mm OIS and 12-35mm OIS) not at all with manual lenses

I tried OIS on/off , AF manual , C and S , different film mode , shutter , aperture , I tried to change all the settings in the menu , nothing is changed

I don't think is about hack coz I tried to install a few , the only thing I didn't try is to install original stock firmware

This issue still also in photographic mode , still already in preview mode ( I mean also when you're not in recording mode)

When you make little movement with OIS "on" shaking stopping , then when you back to fixed shot after a few seconds it comeback again , momentanely shaking stopped happens also during manual focusing on MF mode

with 14-45mm it is happens only when I point the camera at the top (check out video below).

with 12-35mm almost always also in horizontal position ( I filmed 10min still shot , the shaking stopped after 3 minutes )

I dunno it sounds like a OIS or AF issues , but does not explain why he does it with both panasonic lenses with same bug but with a different behavior one from another , so I'm afraid that is about GH2 body .

I do not remember if this bug has always done , because I have not paid attention.

it's really hard for me to figure it out and explain well to you ,also cause I'm not speaking English very well.

if any of You ll'be so kind to do same experiments to see if it happens,or have any suggestion It would be extremely grateful

thanks for your time

password: flicker