What's so good about all these new Cluster X settings? In simple terms, after looking at the rate control, quantisation and scaling matrices found in the GH3, Nikon D800 and Canon 5DMKIII I decided upon a radical approach to find out if the GH2 was capable of getting near their very low QP values (which range from predominantly 1 to 30 depending on the detail and luminance of the subject).

What I found was (and this had me concerned before) was that Panasonic's implementation / or ptools labelling!) of rate control using the GH2's quantisation parameter isn't too clear. I needed a way of having a minumum Quant and a desired maximum quant. Strangely with Initial Quantizer = 30, Quantizer for 1080 modes = 3 (+-2 can offer a QP of 1 !) and Quantizer for 720 modes = 30 I could sortof achieve this!!!!

With 720 using B frames (switched on in the 720 encoder 1 settings as = 3) Quantizer for 720 modes seems to work as a highest Quantisation setting (high is worse, low quant is best) together with Initial Quant of 30 (don't worry about such a high starting value here - after the first frame it settles straight back to lowest achievable (best) for the scene. Subsequently, Quantizer for 1080 modes = 3 gives me my lowest desired (best quant) for each opt 24p, 1080i, HBR and 720 modes.

This quantizer rate control now seems to work as in newer High Profile Level 5 (5.1) cameras such as the 5DMKIII and Nikon D800 (and seemingly the GH3) and when matched with a new softer looking matrix - as analysed on the Canon 5DMKIII (with adjustments) - brings a degree of softening to the over sharpe Pany lenses.

I'm also sure that 1080i/FSH?HBR modes work better with half the coded picture buffer size of 720p modes (indeed I switched off 720 Bottom setting (the buffer amount as in automatically works it out) whilst offering a fairly low buffer in bitrate settings in 'patches for testers'.

In summary, the range of QP will be (certianly in 1080p24 modes) from 1 to 30 - often staying very low (less than 10) all round. I believe (although only tested by myself) that the result offers extremely good looking 720p modes (probably the best ever), certainly superior 24p with Intra & Long GOP, and great looking HBR/FSH and iA mode control (though further strenuous tests may well be required). High dynamic functions work it seems too.

All the new Cluster X series settings for each GOP attached below have been tested on the notoriously sharp Pany OIS lenses. Give me feedback.

Its as simple as A, B, C, D, E, F ! Each .ini setting in ptools for Cluster X Series will equate to setA ('DREWnet' 12/15 GOP), setB ('Nebula' 6 GOP), setC ('Spizz' 3 GOP), setD ('Moon' 1 GOP/3 GOP). Any updates will stay on these sets.

"Cluster X Series isn't for pussies!" Driftwood 2013

If you enjoy these settings please don't forget to donate to personal-view by clicking on the link above. Gratitude and thanks to Vitaliy Kiselev.

• Panasonic GH2 Body only: $350.00 + 3 batteries, two chargers. Two battery are genuine Panasonic. Other is off brand. $70 for 2nd Panasonic and $40 for off brand. (Original Box is available if you'd like
• Nikon Nikkor 50mm F1.8 AIS: $70.00
• Nikon Nikkor 24mm F2.8 AIS: $150.00 - protrusion filed down to fit RJ Lens Turbo. Operates perfect! Original buying price. $250
• RJ Lens Turbo - Nikon F/G reducer speed booster turbo adapter to m4/3 mft GF5 GF6 GX1 EM5 EM1 BM - $100 (Comes in original box)
• Lowell Pro SlingShot 102 : $60.00 TOTAL: $860

Original price for all totals over $1000.

You can opt to BUY ALL for $700. I'll put it all in the Lowell Pro Sling Shot 102.

PM me if interested. US only. Paypal only. Buyer pays shipping. All equipment is well taken care of and maintained. Here are some videos I've made with this little powerhouse!

After receiving over a thousand replies in the last 8 weeks in the previous thread we continue the series here from the following link:-

http://www.personal-view.com/talks/discussion/5806/cluster-x-series-1

Whats it all about? Achieving the best looking overall pictures around - throughtout the popular GOPs. The great thing about Cluster X developments is you can mix and match some of the settings to combine into your favourite setting (e.g. GOP1 for 24p and 25p/FSH, GOP 6 For 1080i60/30p and 12/15 for 720p etc...). Slipstream settings do this for you (mixed and matched and with spanning capabilities where we can plus 80% modes on H & iA mode support).

This has been a tough (and still ongoing) challenge, each setting (and ptools patch change) takes an age to check & measure. Its exhausting work - even with 4 cameras on the go. The measuring to check Quantisation, frame sizes and stability adapting one change at a time is pretty debilitating on mental energy. I hope people appreciate waiting for each setting to appear.

All the new Cluster X series settings for each GOP attached below have been tested on the notorious 14-140 Pany sharp lens. Give me feedback.

Its as simple as A, B, C, D, E, F ! Each .ini setting in ptools for Cluster X Series will equate to setA ('DREWnet' 12/15 GOP), setB ('Nebula' 6 GOP), setC ('Spizz' 3 GOP), setD ('Moon' 1 GOP/3 GOP), setE (Slipstream 1) & setF (Slipstream 2) setG (Slipstream 3) and finally setH (Redshift). Any updates will stay on these sets.

"Bitrate is King. Who needs hi powered scaling matrices when enough Bitrate (if you have it) can drive the quantisation..." Quote from my conversation with Dark Shikari - X264 dev 2012

If you enjoy these settings please don't forget to donate to personal-view by clicking on the link above. Gratitude and thanks to Vitaliy Kiselev.

.

My current workflow is: MTS files into AE > converted to 2.33 aspect ratio (1920x824) DNxHD format > footage imported and edited within Premiere Pro > exported as 175 bit DNxHD 1920x1080 master file. Note that the 2.33 conversion is strictly letterboxing via composition settings in AE and not altering the pixel dimensions (as those 1920x824 files don't show the pixilation).

One thing I noticed was that when I expand the video feed in Premiere it shows the pixilation that's outputted in the final format, but I wrote that off as simply being reduced resolution for real time playback that wouldn't translate to the final video. Also the preview remains pixilated even with no effects applied (only effects on clips are quick color corrector, Neat Video, and shadows/highlights).

Any insight would be greatly appreciated. I've included a still of the 175 bit DNxHD final video, and a matching frame of the original MTS file straight from the camera. Ignore the top and bottom margins, but look at the high contrast lines like on the Marshal logo, and the metal frame of the B-52 amp below it.

Any ideas of how to get my file off of the sd card? I'm scared to remove the sd card from the reader attached to my computer. (WRITTEN ON TUES. JULY 9, 2013 at 4:37pm Eastern Standard Time, U.S.)

Whats it all about? Achieving the best looking overall pictures around - throughtout the popular GOPs. The great thing about Cluster X developments is you can mix and match some of the settings to combine into your favourite setting (e.g. GOP1 for 24p and 25p/FSH, GOP 6 For 1080i60/30p and 12/15 for 720p etc...). Slipstream settings do this for you (mixed and matched and with spanning capabilities where we can plus 80% modes on H & iA mode support).

This has been a tough (and still ongoing) challenge, each setting (and ptools patch change) takes an age to check & measure. Its exhausting work - even with 4 cameras on the go. The measuring to check Quantisation, frame sizes and stability adapting one change at a time is pretty debilitating on mental energy. I hope people appreciate waiting for each setting to appear.

All the new Cluster X series settings for each GOP attached below have been tested on the notorious 14-140 Pany sharp lens. Give me feedback.

Its as simple as A, B, C, D, E, F ! Each .ini setting in ptools for Cluster X Series will equate to setA ('DREWnet' 12/15 GOP), setB ('Nebula' 6 GOP), setC ('Spizz' 3 GOP), setD ('Moon' 1 GOP/3 GOP), setE (Slipstream 1) & setF (Slipstream 2). Any updates will stay on these sets.

"Bitrate is King. Who needs hi powered scaling matrices when enough Bitrate (if you have it) can drive the quantisation..." Quote from my conversation with Dark Shikari - X264 dev 2012

If you enjoy these settings please don't forget to donate to personal-view by clicking on the link above. Gratitude and thanks to Vitaliy Kiselev.

.

Cluster X 'Slipstream'

A series of GOP combination settings drawn from the Cluster X series but set at nominal bitrate settings (40 to 72Mbps) to achieve a better spanning percentage for longer recordings plus the ability to be used on slower sd cards. Slipstream attempts to correlate the actual clip duration to the TS (transport stream) duration whilst providing error free population of the cpb buffers. And it seems to work very well at these settings. :-)

Slipstream #1 (Rev B): Release Date: 10/03/2013

A mix of Nebula and DREWnet settings all tightly packed into 72Mbps max 24p and around 40-52Mbps for everything else which in my PAL tests SPAN! You also get 80% mode at 24H and iA modes working. NTSC 720p60 and FSH/HBR30p should now span.

1080p24/1080i50/HBR25p/720p50 at GOP 6 1080i60/HBR30p & 720p60 at 12 GOP

Slipstream #2: Release Date: 10/03/2013

Including;-

1080p24H 88Mbps GOP3

FSH1080i50/HBR25p 60Mbps GOP3

720p50 62Mbps GOP6

FSH1080i60/HBR30p 44Mbps GOP12

720p60 52Mbps GOP12

Slipstream #3: Release Date: 15/03/2013

Including THE GH3 MATRIX ON ALL REC MODES;-

1080p24H 150Mbps GOP1 (moon style)

FSH1080i50/HBR25p 70Mbps GOP1

720p50 62Mbps GOP6

FSH1080i60/HBR30p 64Mbps GOP3

720p60 52Mbps GOP12

NB: Ive had one occasion where the camera just freezes with no apparent error. If this happens simply leave the camera alone for a minute or two until it fully writes out to sdcard (emptying all buffers) THEN turn off/battery pull. Hopefully you will notice that all your spanned files are there on next powerup.

Does anyone have any recommendations for a hack that would work best in a live music setting with constant changing lights and what not?