Personal View site logo
Official Nikon D600 and D610 topic
  • 236 Replies sorted by
  • @LPowell

    Finally i tried the patch, but i didnt find it good enough and by the way i got a bit of scared that my card (48mbps extreme pro sandisk) wouldnt support it during the shooting today. The important that its safe. So, i updated the cam to the original firmware again. I think i will do some test after finalizng the shooting for the videoclip.

  • @anacrofilosoteca That's the right process. Be safe. When you have time test, test, test, before going out on a shoot with it.

  • @LPowell Looking forward to hearing about your profiles for the D600.

  • D600 Firmware Version 1.03

    • Added support for the following features of AF-P lenses:
      • If the standby timer expires after the camera has focused, the focus position will not change when the timer is reactivated.
      • In manual focus mode, the focus indicator in the viewfinder (or in live view, the focus point selected in the monitor) will flash to show that infinity or the minimum focus distance has been reached by rotating the focus ring.
      • Added support for AF-P DX lenses.
    • Fixed the following issues:
      • Optimal exposure would sometimes not be achieved in photos taken in live view using a lens with electromagnetically controlled aperture (type E lenses).
      • When used to take pictures after an option was selected for Custom Setting d10 (Exposure delay mode) in the CUSTOM SETTING MENU, Camera Control Pro 2 would sometimes display the error “The camera was not able to take a picture.” despite having actually taken the picture.

    http://downloadcenter.nikonimglib.com/en/download/fw/246.html

  • D610 Firmware Version 1.02

    • Added support for the following features of AF-P lenses:
      • If the standby timer expires after the camera has focused, the focus position will not change when the timer is reactivated.
      • In manual focus mode, the focus indicator in the viewfinder (or in live view, the focus point selected in the monitor) will flash to show that infinity or the minimum focus distance has been reached by rotating the focus ring.
      • Added support for AF-P DX lenses.
    • Fixed the following issues:
      • Optimal exposure would sometimes not be achieved in photos taken in live view using a lens with electromagnetically controlled aperture (type E lenses).
      • When used to take pictures after an option was selected for Custom Setting d10 (Exposure delay mode) in the CUSTOM SETTING MENU, Camera Control Pro 2 would sometimes display the error “The camera was not able to take a picture.” despite having actually taken the picture.

    http://downloadcenter.nikonimglib.com/en/download/fw/247.html

  • Nikon D610 DSLR Body Refurbished, $899

    https://www.adorama.com/inkd610r.html

  • Nikon D600 Firmware Version 1.04

    • The SETUP MENU > Time zone and date > Time zone display now shows only the names of major cities in the currently selected zone.
    • Fixed an issue that resulted in over-application of distortion control in pictures taken with an AF-P DX NIKKOR 10-20mm f/4.5-5.6G VR lens at a focal length of 10 mm and with FX (36x24) 1.0x selected for Image area > Choose image area, Off selected for Image area > Auto DX crop, and On selected for Auto distortion control in the SHOOTING MENU.

    https://downloadcenter.nikonimglib.com/en/download/fw/316.html

  • Nikon D610 Firmware Version 1.04

    • Fixed an issue that resulted in over-application of distortion control in pictures taken with an AF-P DX NIKKOR 10-20mm f/4.5-5.6G VR lens at a focal length of 10 mm and with FX (36x24) 1.0x selected for Image area > Choose image area, Off selected for Image area > Auto DX crop, and On selected for Auto distortion control in the SHOOTING MENU.

    https://downloadcenter.nikonimglib.com/en/download/fw/317.html

  • The D750 is so much more advanced, just get that for slightly more! (although it is nice they bundled the D610 with a 50 f1.8G instead of a crummy kit lens)