The new free AtomOS 10.51 for Ninja V is available now. The firmware update further improves the UI and workflow, and Z CAM E2 series users get extended camera control via the Ninja V touchscreen. Ninja V AtomOS firmware update 10.51 for Z CAM control released. Source: Atomos Roughly two weeks ago we already informed you about the firmware update 10.5 for the Ninja V. This update enabled the 5″ monitor-recorder from Atomos with the ability to control various settings of Z CAM cameras. Atomos now announced further free firmware update AtomOS 10.51 for the Ninja V which further extends the Z CAM control ability. Let’s take a short look at what’s new. AtomOS 10.51 Update for Ninja V The new Z CAM navigation updates include: Bring up the Z CAM menu display from the Ninja V touchscreen via the camera control menu. Note: camera control menu is not possible when recording RAW via HDMI. Navigate the camera menu with Menu, Arrow and Enter keys directly via the Ninja V touch screen as well as via the on-camera buttons. A function added in the Ninja V record menu to force menus to remain active in cases where recording menu and display information is required. Support was added to the AtomHDR engine for Z Cam Zlog2 Gamma when recording video output for recording in ProRes or DNx. HLG and PQ monitoring modes allow for the extended dynamic range to be expanded beyond the 6 stop limit of Rec.709 without the need for exposure compensation. Native mode allows...
Published By: CineD - Friday, 17 July, 2020