If you’re looking to unlock intelligent power distribution to your Blackmagic PYXIS camera to better monitor and allocate your cinema camera workflows, then we have some good news for you. The company MID49 is adding a new Power Distribution option to the market specifically for the Blackmagic PYXIS with a new Power Distribution DB-9 Box.Designed to attach directly to the camera body itself using two rear 1/4-20 threaded holes, this intelligent power distribution option could be a worthy investment to monitor camera power and dictate remaining power budgets.Let's look at the MID49 Power Distribution Box DB-9 for the Blackmagic PYXIS, which is set to come in Gold Mount and V-Mount options.MID49 Power Distribution Box DB-9 for the Blackmagic PYXISTailored to provide intelligent power distribution with D-Taps, 5V USB-C PD, 3pin Fischers, and 2pin LEMO compatible connectors, the MID49 Power Distribution Box DB-9 for the Blackmagic PYXIS will feature a removable REMOTE USB-C cable, which can enable remote start and stop capabilities using 3pin Fischer devices. Users can hot-swap between an onboard battery and a 4-pin XLR DC INPUT without losing camera or accessory power. Plus, when both sources are connected, the DC INPUT will be able to take priority down to 12.5V, at which point the DB-4 will switch to an onboard battery. The mount design should allow for a Sony BP-U35 battery to be installed in the camera to function as an emergency backup as well. If you’d like to swap the internal battery, users can swing the DB-9...
Published By: NoFilmSchool - Thursday, 27 March